参考文献

[1]　Weast RC(ed). Hand book of chemistry and physics[M]. Vol 57, CRC Press, Cleveland, Ohio.

[2]　李磊. 加氢站高压氢系统工艺参数研究[D]. 杭州:浙江大学,2007.

[3]　李星国. 氢与氢能[M]. 北京: 机械工业出版社, 2012: 153⁃160.

[4]　William C Whitman, et al. 制冷与空气调节技术[M]. 5版. 寿明道,译.北京:电子工业出版社, 2008:29⁃31.

[5]　Hoerbiger. 压缩机基础理论及应用. https://wenku.baidu.com(2017.05.04)

[6]　张超武,等. 超高压氢气压缩机组的研制[J]. 压缩机技术, 1990, 3:1⁃6.

[7]　张超武. 200MPa氢气压缩机组的研制[J]. 流体工程, 1992, 20(8): 17⁃21.

[8]　朱国辉, 郑津洋. 新型绕带式压力容器[M]. 北京:机械工业出版社, 1995:1⁃12.

[9]　Zuttel A, Borgschulte A, Schlapbach L. Hydrogen as a future energy carrier[J]. Weinheim: Wiley⁃VCH Verlag GmbH&Co kGaA, 2008: 167⁃170.

[10]　郑传祥. 复合材料压力容器[M]. 北京:化学工业出版社, 2006: 238⁃243.

[11]　US Department of Transportation.DOT CFFC Standard,Basic requirements for fully wrapped carbon fiber reinforced aluminum lined cylinder[S]. Fifth revision, 2007.

[12]　Yoshida T,Kojima K.Toyota MIRAI fuel cell vehicle and progress toward a future hydrogen society,electrochem[J].Soc Interface,2015,24:45⁃49.

[13]　Nonobe Y,Member.Development of the fuel cell vehicle Mirai[J].IEEJ Trans,2017,12:5⁃9.

[14]　郑传祥. 复合材料压力容器[M]. 北京:化学工业出版社, 2006: 251⁃253.

[15]　李星国. 氢与氢能[M]. 北京: 机械工业出版社, 2012: 164⁃166.

[16]　郑津洋,开方明,刘仲强,等. 高压氢气储运设备及其风险评价[J]. 太阳能学报,2006, 27(11): 1168⁃1174.

[17]　Weisberg A H, Aceues S M,Espinosa⁃Loza F, et al.Delivery of cold hydrogen in glass fiber composite pressure vessels[J]. Inter J Hydrogen Energy, 2009,34(24):9773⁃9780.

[18]　刘贤信. 大容积全多层高压储氢容器及氢在金属中的富集特性研究[D]. 杭州:浙江大学, 2012:9⁃11.

[19]　Sando Y.Research and development of fuel cell vehicles at Honda[J].ECS Transactions,2009,25(1):211⁃224.